Deep Groove Ball Bearing

Deep groove ball bearings are the hottest bearing type. Therefore, they are available from LYHY in many patterns, variants, series and sizes. Deep groove ball bearings are versatile, self-retaining bearings with sturdy outer rings, inner bands and ball and cage assemblies. These kind of bearings happen to be of basic design, durable in procedure and simple to maintain; They can be purchased in single and twice row models and in start and sealed variants.

In a deep-groove ball bearing, the competition dimensions are near the dimensions of the balls that manage in it. Deep-groove ball bearings can support higher loads. Due to the development technology used, start bearings can still have turned recesses on the external ring for seals or shields. Due to their low frictional torque, they will be suited to high speeds.

Packing:
1. Bearing surface is covered with the anti-rust oil first; After that wrapped with the plastic-type material film;
2. Then packed the roller bearings with draft papered specialist belts;
3. Finally, packing the bearings with wood box fully at the outer packing to invoid the rust or the moist;
4. We can likewise packing the bearings regarding to consumers' special requirement;

Feather
High quality steel: Ultra clean steel to extend bearing life by up to 80%
Advanced grease technology: LYHY lubricants that may extend grease your life and performance.
High Grade Balls: Quiet and smooth operation even at high speed
Super finished raceways: Specially honed to minimize noise and increases lubricant distribution and your life.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% tests ensures total Deep Groove Ball Bearing product quality
Our deep groove ball bearings deliver trustworthy performance in a variety of applications and conditions. With super-finished raceways and controlled geometries, our premium style helps ensure consistent top quality. Our portfolio involves standard, thin section, narrow, wide and miniature and extra-small deep groove ball bearings that period 3 mm to 400 mm bore sizes. The extended product line carries a complete supplying of open, shields, seals and snap ring combinations.
Its chrome steel engineering helps it be durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing maintain lubricant in and contaminants out. This single-row sealed ball bearing is for use in applications that entail mixed radial and axial loads and a dependence on high running precision at substantial rotational speeds. Such applications involve clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.