Clamping Shaft Collars

All EPT shaft collars, including quick-clamping collars, are single point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar experience to bore relationship leading to correct component positioning on the shaft and even pressure on interfaced factors.
Quick-clamping shaft Clamping Shaft Collars collars from EPT are made of high quality light weight aluminum with type-II sulfuric anodized finishes, with a dark finish in the collar and a gold finish upon the clamping lever for added visibility. Metal collars are corrosion resistant, lighter than different metals, have low inertia and also have non-magnetic properties. All EPT goods happen to be RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars are 0.375” to at least one 1.5” in the in . series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is constructed of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a more powerful holding power and bigger axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing set up or repositioning everywhere on the shaft without disturbing existing factors. It accommodates a greater variety of shaft diameters than setscrew collars and works well on both hard and soft shafts. It is made of metal for weldability and rust resistance with a black oxide surface finish for a attractive appearance and level of resistance to white-colored corrosion, chipping and flaking, and stick-slide of the screw during torqueing, bettering the collar's grasp on the shaft. Black oxide also provides gentle corrosion resistance and better lubricity. This collar comes with forged socket-brain cap screws for securing the collar onto the shaft. The functioning temperatures because of this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is well suited for use in various applications, which includes in the automotive industry to situate pieces in automobile electrical power steering assemblies, the manufacturing industry to locate pieces on a conveyor belt system, and the hobby craft industry to hold tires on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft with no need to remove other ancillary elements. Clamps firmly set up once tightened to the shaft. Perfect for positioning parts such as for example bearings or sprockets onto shafts.
The positioning is easily adjusted when fitted onto a shaft. Clamps firmly in place once tightened to the shaft. Perfect for positioning ingredients such as bearings or sprockets onto shafts.
The double split shaft collar manufactured from steel browned (clamp collar) is easy to attach. The shaft collars usually do not harm the shaft. Also, they are insensitive to external forces and vibrations and distribute the holding forces evenly over the whole shaft circumference.
Clamp-style and collection screw shaft collars from Grainger could be indispensable to power transmission. They can carry bearings and sprockets on shafts, situate parts in engine and gearbox assemblies and serve as mechanical stops. A two-piece clamping shaft collar may easily wrap around a difficult or very soft shaft without marring. Arranged screw collars make use of a cup point socket arranged screw to lock onto a smooth or predrilled shaft.

The collar clamping mechanism works quickly and successfully with simple hands opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface area of the collar. The look of the cam on the lever and the mating machined surface area on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In scenarios where higher holding ability is or clamp axial load is necessary, the quick-clamping collar isn't the recommended decision. EPT offers a complete line of industry-leading one-part and two-piece shaft collars created for these applications.